| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 UNTHREADED HOLE |
| CWDM |
SHAFT CENTER TO MOUNTING SURFACE DISTANCE |
3.500 INCHES SINGLE END |
| AAJT |
OVERALL HEIGHT |
6.500 INCHES |
| CWGQ |
CONNECTION TYPE AND VOLTAGE RATING IN VOLTS |
115.0 LINE TO NEUTRAL SINGLE INPUT |
| AKCT |
SHAFT ROTATION DIRECTION |
CLOCKWISE SINGLE END OR COUNTERCLOCKWISE SINGLE END |
| ABGH |
STEP DIAMETER |
0.562 INCHES MINIMUM SINGLE END AND 0.750 INCHES MAXIMUM SINGLE END |
| CWDY |
TEMP RATING |
50.0 AMBIENT DEG CELSIUS AND 50.0 OPERATING DEG CELSIUS |
| ABWV |
SHAFT DIAMETER |
0.562 INCHES MINIMUM SINGLE END AND 0.875 INCHES MAXIMUM SINGLE END |
| AXCP |
WINDING TYPE |
COMPOUND WOUND |
| AAJV |
OVERALL WIDTH |
6.656 INCHES |
| CWDT |
NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
3.000 INCHES |
| CWFY |
NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
4.875 INCHES |
| BFMF |
COOLING METHOD |
AMBIENT AIR |
| BKPQ |
INCLOSURE SPECIFICATION |
MIL-STD-108 |
| CBBL |
FEATURES PROVIDED |
VERTICAL MOUNTING POSITION |
| FEAT |
SPECIAL FEATURES |
LH THREAD ON ARMATURE SHAFT |
| CWGL |
CURRENT RATING IN AMPS |
3.500 SINGLE INPUT |
| THSD |
THREAD SERIES DESIGNATOR |
UNF SINGLE END |
| CWHZ |
SHAFT END CHARACTERISTIC |
A2 FIRST STYLE SINGLE END AND A9 SECOND STYLE SINGLE END AND A11 THIRD STYLE SINGLE END |
| CNXS |
POWER RATING |
0.2500 HORSEPOWER OUTPUT |
| AAJU |
OVERALL LENGTH |
17.593 INCHES |
| ANPZ |
INCLOSURE FEATURE |
SPRAY TIGHT |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-M-17556 SPECIFICATION |
| AASA |
THREAD LENGTH |
0.5625 INCHES NOMINAL SINGLE END |
| AKPS |
DUTY CYCLE |
CONTINUOUS |
| CWFX |
ROTOR SPEED RATING IN RPM |
1725.0 SINGLE FULL LOAD |
| AXGY |
MOUNTING METHOD |
FIXED BASE |
| BKPB |
CURRENT RATING METHOD |
LOAD |
| CWCS |
LENGTH OF SHAFT FROM HOUSING |
6.093 INCHES SINGLE END |
| CQJX |
NOMINAL THREAD SIZE |
0.500 INCHES SINGLE END |