| ZZZV |
FSC APPLICATION DATA |
SPEEDOMETER,VEHICULAR |
| APTD |
END TYPE |
ROUND KEYED FIRST END |
| CFQW |
CROSS SECTION SIZE AND LOCATION |
0.150 INCHES FILTER HOUSING LEFT SIDE ANY ACCEPTABLE FIRST END AND 0.153 INCHES ONE WASHER SWAGED TO SLEEVE ANY ACCEPTABLE FIRST END |
| BJPS |
CASING MATERIAL |
RUBBER AND STEEL |
| CFRN |
CASING SURFACE TREATMENT |
ANY ACCEPTABLE |
| AAJD |
THREAD CLASS |
2B SECOND END |
| AECT |
THREAD DEPTH |
0.375 INCHES NOMINAL SECOND END |
| AWZY |
END CONNECTION TYPE |
THREADED INTERNAL BOTH ENDS |
| ABUJ |
THREAD SIZE (NON-CORE) |
ERR-070 |
| APJC |
THREAD LOCATION |
INTERNAL BOTH ENDS |
| AEDN |
TIP LENGTH |
1.018 INCHES MINIMUM FIRST END AND 1.022 INCHES MAXIMUM FIRST END |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNF SECOND END |
| AJXJ |
CORE MATERIAL |
STEEL |
| ASDB |
WIDTH ACROSS FLATS |
1.000 INCHES NOMINAL FIRST END |
| CFRW |
END OVERALL DIAMETER |
0.875 INCHES NOMINAL SECOND END |
| CFRZ |
CORE OVERALL LENGTH |
68.812 INCHES NOMINAL |
| CFRW |
END OVERALL DIAMETER |
1.188 INCHES NOMINAL FIRST END |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNS FIRST END |
| FEAT |
SPECIAL FEATURES |
COUNTERCLOCKWISE CORE ROTATION DIRECTION |
| CFRT |
SWIVEL END |
NOT PROVIDED BOTH ENDS |
| CFRP |
CASING LENGTH BETWEEN FERRULES |
67.500 INCHES NOMINAL |
| ASDB |
WIDTH ACROSS FLATS |
0.750 INCHES NOMINAL SECOND END |
| CFRQ |
CASING OUTSIDE DIAMETER |
0.300 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AECT |
THREAD DEPTH |
0.327 INCHES NOMINAL FIRST END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND BOTH ENDS |
| AEDN |
TIP LENGTH |
0.950 INCHES MINIMUM SECOND END AND 1.010 INCHES MAXIMUM SECOND END |
| CFQW |
CROSS SECTION SIZE AND LOCATION |
0.101 INCHES BOTTOM HALF NOT APPLICABLE SECOND END AND 0.104 INCHES SIDE WAIST NOT APPLICABLE SECOND END |
| CFRR |
CASING PROTECTIVE DEVICE TYPE |
PLASTIC COVER OR RUBBER COVER |
| BDRL |
SETSCREW |
NOT INCLUDED BOTH ENDS |
| CFRY |
LUBRICATION FITTING |
NOT PROVIDED BOTH ENDS |
| CFSM |
STRENGTH RATING CHARACTERISTICS (NON-CORE) |
15.0 POUNDS TORSION STRENGTH EITHER DIRECTION |
| CFSL |
CORE REMOVABILITY |
REMOVABLE |
| APTD |
END TYPE |
SQUARE MALE SECOND END |
| CFSB |
CORE ROTATION DIRECTION |
CLOCKWISE |
| BPPL |
WRENCHING FACILITY TYPE |
HEXAGON BOTH ENDS |
| ABHP |
OVERALL LENGTH |
68.812 INCHES NOMINAL |
| AKMF |
CORE SURFACE TREATMENT |
CADMIUM PLATED |
| AKMH |
CORE DIAMETER |
0.150 INCHES NOMINAL |
| AAJD |
THREAD CLASS |
2B FIRST END |