| AEDN |
TIP LENGTH |
0.972 INCHES NOMINAL FIRST END |
| AASA |
THREAD LENGTH |
0.484 INCHES NOMINAL FIRST END |
| ABHP |
OVERALL LENGTH |
169.125 INCHES NOMINAL |
| AEDN |
TIP LENGTH |
0.770 INCHES NOMINAL SECOND END |
| APTD |
END TYPE |
ROUND KEYED FIRST END |
| CFRW |
END OVERALL DIAMETER |
1.000 INCHES MAXIMUM FIRST END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND SECOND END |
| AKMH |
CORE DIAMETER |
0.128 INCHES MINIMUM AND 0.152 INCHES MAXIMUM |
| CFRN |
CASING SURFACE TREATMENT |
ANY ACCEPTABLE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND FIRST END |
| AAJD |
THREAD CLASS |
2B SECOND END |
| ABUJ |
THREAD SIZE (NON-CORE) |
ERR-070 |
| APJC |
THREAD LOCATION |
INTERNAL FIRST END |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNF SECOND END |
| AWZY |
END CONNECTION TYPE |
THREADED INTERNAL FIRST END |
| BJPS |
CASING MATERIAL |
PLASTIC |
| AWZY |
END CONNECTION TYPE |
THREADED INTERNAL SECOND END |
| APJC |
THREAD LOCATION |
INTERNAL SECOND END |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
A GROUP AND 9 CLASS AND I TYPE |
| AJXJ |
CORE MATERIAL |
STEEL |
| CFSM |
STRENGTH RATING CHARACTERISTICS (NON-CORE) |
15.0 INCH-POUNDS TORSION STRENGTH EITHER DIRECTION |
| CFRZ |
CORE OVERALL LENGTH |
169.125 INCHES NOMINAL |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNS FIRST END |
| CFRW |
END OVERALL DIAMETER |
0.750 INCHES MAXIMUM SECOND END |
| CFRR |
CASING PROTECTIVE DEVICE TYPE |
PLASTIC COVER |
| AASA |
THREAD LENGTH |
0.375 INCHES NOMINAL SECOND END |
| CFQW |
CROSS SECTION SIZE AND LOCATION |
0.104 INCHES UPPER LEFT FRONT THIGH NOT APPLICABLE SECOND END |
| CFRQ |
CASING OUTSIDE DIAMETER |
0.300 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| CFRT |
SWIVEL END |
NOT PROVIDED FIRST END |
| CFRT |
SWIVEL END |
NOT PROVIDED SECOND END |
| CFSL |
CORE REMOVABILITY |
REMOVABLE |
| CGDN |
MINIMUM OPERATING RADIUS |
5.000 INCHES |
| APTD |
END TYPE |
SQUARE MALE SECOND END |
| CFRY |
LUBRICATION FITTING |
NOT PROVIDED FIRST END |
| CFSB |
CORE ROTATION DIRECTION |
CLOCKWISE |
| CFRY |
LUBRICATION FITTING |
NOT PROVIDED SECOND END |
| AKMF |
CORE SURFACE TREATMENT |
CADMIUM PLATED OR ZINC PLATED |
| CFQW |
CROSS SECTION SIZE AND LOCATION |
0.153 INCHES CLEANING WIRE ANY ACCEPTABLE FIRST END |
| CFRP |
CASING LENGTH BETWEEN FERRULES |
168.000 INCHES NOMINAL |
| AAJD |
THREAD CLASS |
2B FIRST END |