| MARK |
SPECIAL MARKINGS |
53711-7251124-1 IAW MIL-STD-130 IN CHARACTERS APPROX. 0.19 IN. |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
PROTECTIVE PLATE |
| ABMK |
OVERALL WIDTH |
20.100 INCHES NOMINAL |
| ABKW |
OVERALL HEIGHT |
19.820 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
W0.075 IN. THICK; RECTANGULAR; WITH LONG SIDE DOWN, HAS CUTOUTS ON EACH TOP CORNER: 0.65 IN. W X 0.75 IN. D, AND LARGER CUTOUTS AT SAME CORNERS: 4.80 IN. W X 3.070 IN. DEEP: TOP EDGE ROLLS BACK WITH RADIUS OF 0.18 IN. FOR LENGTH OF 0.25 IN.; HAS 6 MOUNTING HOLES, 0.375 INCH IN DIA.: 2 NEAR TOP EDGE: 7.547 AND 12.453 IN. FROM LEFT OUTSIDE EDGE AND 18.280 INCH FROM BOTTOM EDGE AND 4 NEAR BOTTOM EDGE: 0.750 INCH FROM BOTTOM EDGE AND 3.448, 7.848, 12.248 AND 16.848 INCHES FROM LEFT EDGE |
| SUPP |
SUPPLEMENTARY FEATURES |
EHAS 1 MORE HOLE, 1.00 INCH IN DIA, 3.500 IN. FROM BOTTOM EDGE AND 12.000 IN. FROM LEFT EDGE; HAS 2 ADDITIONAL HOLES, 0.500 IN. IN DIA: 2.880 IN. FROM BOTTOM AND 10.000 AND 16.750 IN. FROM LEFT EDGE |
| SFTT |
SURFACE TREATMENT |
PAINT SIDE FROM WHICH TOP ROLLS BACK PER WS19201, GR F AND OTHER SIDE COAT PER WS20168, OVERSPRAY ONTO EDGES AND HOLES IS PERMITTED |
| AGAV |
END ITEM IDENTIFICATION |
MK 14 MOD 2, CANNISTER |